An effective emergency response protocol is crucial for ensuring the safety of occupants and mitigating damage during a fire incident. When utilizing an FM 200 fire suppression system, it’s essential to have a well-defined protocol in place. Below is a complete guide outlining the steps of an emergency response protocol with FM 200: Click here to get info about FM200 refill.
Upon detection of a fire, occupants must initiate immediate evacuation procedures as outlined in the facility’s emergency action plan. This includes activating fire alarms, notifying others of the emergency, and evacuating the premises via designated exit routes.
Activation of FM 200 systems:
Simultaneously, the FM 200 suppression system should be activated automatically or manually, depending on the detection system’s configuration. The control panel triggers the release of FM 200 gas into the protected area, suppressing the fire and preventing its spread.
Notification of emergency services:
While occupants evacuate, designated personnel or alarm monitoring services should notify the local fire department and emergency responders of the fire incident. Provide essential details such as the location of the fire, type of suppression system activated, and any known hazards or special considerations.
Isolation of the area:
To prevent the spread of fire and minimize exposure to FM 200 gas, isolate the affected area by closing doors and barriers if safe to do so. This helps contain the fire and facilitates more effective suppression by the FM 200 system.
Ventilation and airflow management:
Once the fire is extinguished and the area is deemed safe, implement proper ventilation procedures to remove any residual FM 200 gas and restore normal airflow. This may involve opening windows, doors, or activating mechanical ventilation systems to facilitate air exchange.
After the fire incident has been resolved and the area is deemed safe for re-entry, conduct a thorough post-incident assessment to evaluate the effectiveness of the emergency response protocol and the performance of the FM 200 suppression system. Identify any areas for improvement and implement corrective actions as necessary.
System recharge and maintenance:
Following a fire event, recharge the FM 200 system with fresh agent cylinders to ensure it is ready for future use. Conduct an inclusive inspection of all system components, including storage containers, piping, nozzles, detection devices, and control panels, to identify any damage or deficiencies that require repair or replacement.